What's New

New Premier Coatings Underwater Epoxy

Underwater Epoxy

SeaShield SplashZone UW Epoxy is a solvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces with very minimal experience or tools required.

Premier Coatings Liquid Coatings

Premier Coatings Liquid Coatings

For Technical Data Sheets, please click for our Catalog.

Skip Navigation LinksHome Page : Products : Liquid Coatings

Specification Guides

Protal 7200 - High build, fast cure pipeline coating
A fast cure, one coat epoxy coating that can be hand or spray applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines. Exhibits excellent cathodic disbondment properties at 175°F (80°C) with 7 mm disbondment.

Protal 7200 Repair Cartridge - Fast Cure Epoxy Repair Coating
Repair coating for damaged FBE and other liquid coated pipelines. Also used as coating of cadweld areas.

Protal Air Cartridge Gun (1000 ml) - For Spraying Cartridges of Protal Liquid Coatings
Can be used in a wide variety of spray applications using Protal Liquid Coatings. It is designed for use where fast and easy setup, no clean up, minimal material waste and minimal equipment maintenance is needed.

Protal 7125 - Fast cure, low temperature pipeline coating - winter grade
A low temperature coating that can cure at -4°F (-20°C). The coating can be backfilled in 30 minutes at 50°F (10°C). Used for girth welds, tie-ins, rehabilitation, repairs to FBE and sacrificial coating to FBE.

Protal 7125 Repair Cartridge - Fast cure high build pipeline repair coating
A fast cure pipeline coating that is packaged in cartridge tubes and applied with a dispensing gun. The coating can be backfilled in 30 minutes at 50°F (10°C). Used for girth welds, tie-ins, repairs to FBE, rehabilitation, sacrificial coating to FBE and caldwelds.

Protal 7900HT - High temperature pipeline coating
A high build epoxy coating that can be hand applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines. Maximum operating temperature up to 302°F (150°C).

Protal 7300 - Moisture Tolerant Pipeline Liquid Coating
Protal 7300 is a VOC free, 100% solids epoxy coating specially formulated to coat dry, damp or wet surfaces. It is a high build liquid coating that is Premier Coatings Protal Applicator Pad, Premier Coatings Protal 9" Roller, or brush applied in one coat in the field or shop.

Protal ARO - Abrasion Resistant Pipeline Coating
Protal ARO is a VOC free, 100% solids liquid epoxy coating formulated to be applied over FBE as an ARO coating (abrasion resistant overlay). It is a 3:1 ratio compatible for most plural component spray units coating that can be spray or hand applied in the field or shop.

Protal ST Epoxy Mastic - Surface tolerant liquid epoxy
A fast drying surface tolerant epoxy coating that can be hand or spray applied to wire brushed rusty steel surfaces. Used for above and below ground pipelines, structural steel, bridges, tanks, and other steel surfaces.

Prembond Bitumen Mastic - Single component bitumen mastic coating
A high build single component cold applied liquid bituminous coating. Used for corrosion protection of buried pipe, flanges, valves and fittings.

Prembond UV Barrier 60 - High Gloss Aliphatic Polyurethane Topcoat
Used as a topcoat over Protal Liquid Coatings to provide color coding, abrasion resistance, chemical resistance and UV stability. Will cure at temperatures as low as 40°F.

Prembond UV Barrier 65 - High Solids Aliphatic Polyurethane
Used as a topcoat over Protal Liquid Coatings to provide color coding, abrasion resistance, chemical resistance and long term UV stability. Will cure at temperatures as low as 40°F (4°C).

Premier OuterArmour - Liquid Epoxy Topcoat for Premier Coatings Petrolatum Tapes
Premier OuterArmour is a two-component 100% solids liquid epoxy coating. It is a tough/durable topcoat that provides excellent abrasion resistance for Premier Coatings Petrolatum Tapes.

Protal 7200 Cartridge (1000 ml) - Fast Cure, High Build Spray Applied Pipeline Coating
Protal 7200 Cartridge (1000 ml) is a VOC free, 100% solids, 2 part epoxy coating specially formulated to compliment FBE coated pipe.

Archco 403D - Vinyl Ester Glass Flake Coating
Corrosion protection for oil storage tank linings, filtration vessels, ion exchange vessels, effluent streams and water treatment facilities. Also, used for the protection of process vessels, stacks, ducts, fume scrubbers, fan cases and many other corrosive environments.